Asko washing machine error codes

Error messages Cause \ Solution
Close the DoorClose the washer door and the program will start
Overflow fault1. Shut off the water tap.
2. See "Water outlet fault"
Water outlet faultCheck:
• that no objects are stuck in the drainage hose outlet.
• that the drainage pump is not blocked by foreign objects. Clean the pump. See the "Care and cleaning" chapter.
• that there are no kinks in the drainage hose. After taking measures, run the Drain program or press the Door opening button (key symbol) to empty the machine. If this does not resolve the problem, call the service division
Water inlet faultCheck:
• that the tap on the water pipe is open.
• that the filter in the machine’s water inlet is not blocked.
1. Shut off the water tap.
2. Unscrew the hose.
3. Clean the filter in the inlet valve on the machine.
4. Screw the hose back on.
5. Turn on the tap and check for leaks.
6. Run the program again to check if the fault is fixed.
7. If this does not resolve the problem, call the service division
Security faultCall the service division!
Wash motor faultCall the service division!
UnbalanceThe machine stops the spin cycle if there is too much imbalance. The washing machine restarts the spin cycle and hopefully the washing is better distributed in the drum. This procedure can be repeated up to 10 times. If the machine still fails to find a good balance, the program jumps to the next step