CDA are a manufacturer of washing machines and kitchen appliances owned by the Polish company Amica Group PLC, which operates in 50 countries worldwide. CDA are located in Nottinghamshire (UK), the company was established in 1991. It belongs to the Amica Group since 2015.
Looking for reliable information on washer repair or dishwasher repair? This is exactly what you’ll find below. No matter what the issue is (you dishwasher doesn’t work properly, your washer is not spinning or is experiencing other malfunction), the tables below will give you useful troubleshooting advice. The first column lists the most common washer and dishwasher problems (for instance, a washer wont spin), and next to it you will find the explanation and possible solutions.
CDA WC460, CDA WC140 dishwasher troubleshooting
WC460 is an integrated dishwasher produced by the UK-based brand of washing machines and kitchen appliances CDA. This is a compact model belonging to the Slimline series. There is a choice of five programs, from Soak to Ultra Clean. They differ in terms of a cycle length as well as temperature, which may vary from 45C to 70C. The Ultra Clean mode terminates with an anti-bacteria rinse that provides the most reliable result.
The CDA WC140 dishwasher belongs to the range of integrated dishwashers made by the CDA brand founded in 1991. Basically, the model provides a choice of five programs. Sometimes just a Prewash or a Quick wash is enough, but in case the degree of soil is rather high, an Intensive mode is more appropriate. There is also an Eco wash function, which suggests reduced consumption of electrical power.
| Problem | Possible cause |
|---|---|
| The programme will not start | Check the plug, fuse and circuit breakers of the mains supply |
| The water tap is turned off | |
| The dishwasher door is not fully dosed | |
| The water inlet filter or the machine filters are blocked | |
| Water remains inside the dishwasher at the end of the programme | The water drain hose is blocked or kinked |
| The filters are blocked | |
| The dishwasher stops in the middle of a programme | Power failure |
| Water inlet failure | |
| Programme is on standby | |
| Wash performance is of a low standard | Poor loading of dishes hinders wash performance. |
| Insuffident detergent added | |
| Inappropriate wash programme selected | |
| Spray arm blocked | |
| Filters clogged or incorrectly fitted | |
| Water drain pump blocked | |
| White stains on the dishes | Insuffident detergent added |
| Rinse aid setting is too low | |
| Insufficient dishwasher salt added | |
| Water softener setting is too low | |
| Salt compartment cap not completely closed | |
| The dishes are not completely dry at the end of the programme | A programme without a drying stage was selected |
| Rinse aid setting is too low | |
| Dishes unloaded too soon (allow time for drying) | |
| There are rust stains on the dishes | Different sets of cutlery should be kept separate |
| Too much salt (Water softener setting is too high) | |
| Salt compartment cap not completely closed | |
| Poor appliance earth (check mains electrical supply) | |
| The door is not opening or closing properly | Door tension not correctly adjusted for the decor door |