Aeg washing machine error codes

In the world of home appliances, AEG, or Allgemeine Elektricitäts-Gesellschaft, has solidified its standing as a reliable manufacturer since its inception in 1887. This Germany-based brand is renowned for producing top-notch devices, including its innovative washing machines.

However, as with any mechanical entity, AEG washing machines may display certain error codes indicating potential issues. This guide aims to assist you in decoding these codes, empowering you to manage potential issues and maintain your machine’s optimal performance.

AEG Laundry Machines: A Snapshot

AEG’s washing machines demonstrate the brand’s commitment to innovative design, performance excellence, and energy conservation. However, even these sophisticated machines can encounter hitches. When this occurs, the appliance’s in-built diagnostic system communicates the issue via specific error codes.

Deciphering AEG Laundry Machine Error Codes

AEG machines display error codes on their digital panel to signify malfunctions. These codes provide valuable insights into the nature of the problem, enabling users to undertake relevant troubleshooting or repair steps.

Here’s an overview of frequently encountered AEG washing machine error codes and their implications:

Error Code E10/E11/E12

These codes generally indicate issues related to water inflow. E10 signifies water supply problems potentially caused by a clogged filter, obstructed hose, or low water pressure. E11 pertains to water fill time issues, typically due to the same reasons as E10. E12 suggests that the water protection system has been triggered, hinting at possible leakage.

Error Code E20/E21/E40

E20 and E21 codes are triggered by drainage issues, which could be due to a blocked drain hose or pump, or a malfunctioning pump. E40 implies a problem with the door lock, possibly caused by a faulty door latch or control panel.

Error Code E50

An E50 error code signifies motor-related problems, such as a worn-out motor or a faulty motor triac located on the control panel. Resolving this typically requires professional intervention.

Error Code E90

An E90 error code denotes communication disruptions between the main control panel and the display board, potentially due to faulty wiring or a malfunctioning control panel.

Resolving AEG Laundry Machine Errors

Upon detecting an error code, consider implementing the following straightforward solutions before resorting to professional help:

  • For water fill issues (E10/E11/E12), verify the water supply is on, the hose is free from kinks, and the filter is clean.
  • For drainage difficulties (E20/E21), inspect and cleanse the drain hose and pump for obstructions. If the pump is faulty, it might require replacement.
  • For door lock troubles (E40), attempt resetting the machine by switching it off and on. If the issue persists, it might necessitate a professional replacing the latch or control panel.
  • For motor problems (E50), due to the complexity, professional help is usually advised.
  • For communication problems (E90), inspect the wiring between the main control panel and the display board. If this doesn’t resolve the issue, it might be due to a malfunctioning control panel and require professional examination.

In Conclusion

This guide presents a fundamental understanding of AEG washing machine error codes. However, it’s always prudent to refer to your machine’s user manual for more detailed instructions and troubleshooting advice. In case the issue persists or if you’re uneasy about performing the suggested steps, don’t hesitate to enlist a professional’s help. After all, ensuring the durability and operational efficiency of your AEG washing machine is the ultimate goal.

AEG L 73283 FL washing machine error codes

The display shows code:Possible cause
E10The appliance does not fill with water
E20The appliance does not drain the water
E40The appliance door is open or not closed correctly. Please check the door!
EXOThe mains supply is unstable. Wait until the mains supply is stable
EFOThe anti-flood device is on. Disconnect the appliance and close the water tap. Contact the service centre

AEG LAVAMAT 68270FL washing machine error codes

The display shows code:Possible cause
E10The appliance does not fill with water properly
E20The appliance does not drain the water
E40The appliance door is open or not closed correctly. Please check the door!
EXOThe mains supply is unstable. Wait until the mains supply is stable
E91No communication between electronic elements of the appliance. Switch off and switch on again