Electrolux dishwasher error codes

Use this list of Electrolux dishwasher error codes to deal with any problem. First try the easiest solutions on your own, and if it does not help, tell the error code to an engineer from the repair service you use. It will help to make the repairs quicker.
Electrolux is a Swedish machine building company with headquarters in Stockholm founded in the 1910. It is widely regarded as one of the leading world manufacturers of electric and gas appliances for domestic and professional needs, as Electrolux icon dishwasher, inter alia. To have a notion about scale of the company’s activity, it is enough to say that every year it sells over 40 million of its products to consumers from 150 countries.
Well, breakdowns are even near production of such giants. To reveal Electrolux dishwasher problems (for example, Electrolux dishwasher not draining) and start Electrolux dishwasher repair, address to the Electrolux dishwasher error codes given below.
This is the help service of the “Electrolux dishwasher error 01” kind.

Electrolux dishwasher error codes

CODE MEANINGSOLUTION
1 Led: Light or LED not lit
2 Led: Light or LED not lit
3 Led: Light or LED not lit
4 Led: Light or LED not lit
5 Led: Light or LED not lit
No fault detected or power failureCheck power supply
Check mains on off switch
Check wiring from mains switch to PCB
1 Led: Light or LED flashing
2 Led: Light or LED not lit
3 Led: Light or LED not lit
4 Led: Light or LED not lit
5 Led: Light or LED not lit
Dishwasher has failed to fill in five minutesCheck that water supply is on
Check anti flood device and Aquastop if fitted
Check fill valve
Check wiring to and from the fill valve
Check pressure sensor
Water distribution problem in IWMS
Dishwasher syphoning to drain
Check electronic controller
1 Led: Light or LED not lit
2 Led: Light or LED flashing
3 Led: Light or LED not lit
4 Led: Light or LED not lit
5 Led: Light or LED not lit
Pressure switch reads dishwasher as emptyCheck leakage from sump and hose couplings
check for a pressure drop on pressure switch hose
Water distribution in IWMS not correct
Dishes upside down fill with water, dishwasher reads low water
Filter blocked
Check anti flood device
1 Led: Light or LED not lit
2 Led: Light or LED flashing
3 Led: Light or LED not lit
4 Led: Light or LED not lit
5 Led: Light or LED not lit
Dishwasher pressure sensor reads as being empty or not enough waterCheck leakage from sump and hose couplings
check for a pressure drop on pressure switch hose
Water distribution in IWMS not correct
Dishes upside down fill with water, dishwasher reads low water
Filter blocked
Check wash pump for cavitation
1 Led: Light or LED not lit
2 Led: Light or LED not lit
3 Led: Light or LED flashing
4 Led: Light or LED not lit
5 Led: Light or LED not lit
NTC temperature sensor errorThermistor open circuit
Check and replace faulty or damaged thermistor
Water temperature greater than 80˚C
Water temperature less than 5˚C
1 Led: Light or LED not lit
2 Led: Light or LED not lit
3 Led: Light or LED not lit
4 Led: Light or LED flashing
5 Led: Light or LED not lit
Dishwasher has failed to heat the water and times out after 45 minutesCheck heating element
Check operation of thermostats
Check thermostat positioning and thermal paste if used
Check wiring
Water heating element defective
Check filters, blocked filters can be a cause
Check electronic controller
1 Led: Light or LED not lit
2 Led: Light or LED not lit
3 Led: Light or LED not lit
4 Led: Light or LED not lit
5 Led: Light or LED flashing
Dishwasher has failed to drain waterCheck drain pump for obstacles or blockage
Check drain pump is not open circuit
Check wiring
Check outlet drain hose for obstructions
Check plumbing for obstructions
Check float valve in fill chamber
Check IWMS levels
1 Led: Light or LED not lit
2 Led: Light or LED not lit
3 Led: Light or LED not lit
4 Led: Light or LED flashing
5 Led: Light or LED flashing
Motor blocked or jammedRotor of main wash pump blocked or siezed
Check pump impellers
No supply to motor
Motor start capacitor short-circuited or damaged
Check wiring to motor