WasherErrorCodes

AEG became a part of industrial culture of Germany. The brand was founded by a Berlin engineer Emil Raterau, in the 1883 in Berlin. The first wiring works were done in Berlin the 1885 and in the 1887, the company was renamed into “Allgemeine Electricits Gesellschaft” (AEG). Two years later, at the Berlin exhibition devoted to accident prevention, AEG presented the first home electric appliances. The company embedded the major milestones of development of household appliances and subsequently constantly strengthened its influence in the German market of household appliances.
Since those times, AEG has continuously been refining its technology profile and creating innovative products establishing industry standards in the field of form and functionality. Dishwashers is one of its products. Even such apparatus are breaking. AEG dishwasher repairs happen. See below the EAG dishwasher error codes. It will help to sort out the causes of a breakdown and ways of repairs.
AEG KO_FAVORIT series dishwasher error codes
AEG OKO_FAVORIT series dishwasher error codes
AEG KDW series dishwasher error codes

AEG KO_FAVORIT series dishwasher error codes

KO_FAVORIT is a range of dishwashers produced by the German make of electrical equipment AEG. Although there can be differences from model to model, basically, they offer six programs, with temperatures ranging from 50°C to 70°C. There are two Bio-modes and a Small Load function, which is very useful when only a few dishes need washing.

Malfunction	Possible Cause	Remedy
END on the programme progress display is flashing: no water is running into the dishwasher.	Tap is blocked or furred with lime-scale.	Clean tap.
	The filter (where present) in the threaded hose fitting at the water inlet valve is blocked.	Clean the filter in the threaded hose fitting.
	The water inlet hose is not correctly laid.	Check hose installation.
DRYING on the programme progress display is flashing.	The siphon is blocked.	Clean siphon.
	The water drain hose is not correctly laid.	Check hose installation.
END and DRYING on the programme progress display are flashing simultane-ously.	The leak prevention system has been triggered.	Close the tap and contact customer service.

AEG OKO_FAVORIT series dishwasher error codes

OKO_FAVORIT is a very vast and diverse lineup of dishwashers. It comprises over 100 models offering varying capacities and feature sets. What they do have in common is the system of error codes that can be used both by a service engineer and a homeowner to diagnose a malfunction and fix the appliance.

Malfunction	Possible Cause	Remedy
The programme indicator for the selected programme is flashing and the indicator is illuminated: there is no water running into the dishwasher.	Tap is closed.	Open tap.
	The filter (where present) in the threaded hose fitting at the water inlet valve is blocked.	Clean the filter in the threaded hose fitting.
	The water inlet hose is not correctly laid.	Check hose installation.
Fault code C2 is displayed on the multi display. The programme indicator for the selected wash programme is flashing.	The siphon is blocked.	Clean siphon.
	The water drain hose is not correctly laid.	Check hose installation.
Fault code C3 is displayed on the multi-display.	The leak prevention system has been triggered.	Close the tap and contact customer service.
The indicator is illuminated.	The indicator is only intended to remind you to check the filter in the dishwasher from time to time and, if necessary, to clean it. It illuminates at regular intervals, independent of the amount of soiling of the filter.	The indicator goes out automatically on the start of the next wash programme.

AEG KDW series dishwasher error codes

The KDW range of dishwashers manufactured by the German company AEG consists of comparatively reliable basic models. Typically, the control panel includes five programs, from just rinsing to intensive. If you’re short of time, you can use a Quick mode. Temperature ranges from 50°C to 70°C.

Symptom	Possible Cause	Solution
on the programme progress display is flashing: no water is running into the dishwasher.	Tap is closed.	Open tap.
	The filter (where present) in the threaded hose fitting is blocked.	Clean the filter in the threaded hose fitting.
	The water inlet hose is not correctly laid.	Check hose installation.
on the programme progress display is flashing.	The sink outlet is blocked.	Clean the sink outlet.
	The water drain hose is not correctly laid.	Check hose installation.
and , on the programme progress display are flashing simultaneously.	The leak prevention system has been triggered.	Close the tap and contact AEG Service Force.