Asko washing machine error codes

Swedish Asko is famous for its quality and reliability, but is not immune from damage. In case of breakage, the owner can contact the service center, but some breakages can be fixed by the owner. Below there is the table of Asko error codes. Thanks to it, the owner can find out the cause of failure of the washing machine and choose a possible repair option.

Error messages	Cause \ Solution
Close the Door	Close the washer door and the program will start
Overflow fault	1. Shut off the water tap.
Water outlet fault	Check:
	• that no objects are stuck in the drainage hose outlet.
	• that the drainage pump is not blocked by foreign objects. Clean the pump.
	• that there are no kinks in the drainage hose. After taking measures, run the Drain program or press the Door opening button (key symbol) to empty the machine. If this does not resolve the problem, call the service division
Water inlet fault	Check:
	• that the tap on the water pipe is open.
	• that the filter in the machine’s water inlet is not blocked.
	Action:
	1. Shut off the water tap.
	2. Unscrew the hose.
	3. Clean the filter in the inlet valve on the machine.
	4. Screw the hose back on.
	5. Turn on the tap and check for leaks.
	6. Run the program again to check if the fault is fixed.
	7. If this does not resolve the problem, call the service division
Security fault	Call the service division!
Wash motor fault	Call the service division!
Unbalance	The machine stops the spin cycle if there is too much imbalance. The washing machine restarts the spin cycle and hopefully the washing is better distributed in the drum. This procedure can be repeated up to 10 times. If the machine still fails to find a good balance, the program jumps to the next step